Civic Sedan L4-1.6L SOHC (VTEC) (1996)
3. If the old windshield is to be reinstalled, use a putty knife to scrape off all traces of old adhesive, then clean the windshield surface with alcohol
where new adhesive is to be applied.
NOTE: Make sure the bonding surface is kept free of water, oil and grease.
CAUTION: Avoid setting the windshield on its edges; small chips may later develop into cracks.
NOTE:
-
Clean the shadowed area.
-
Clean area (A) as shown.
4. Glue the rubber dam and fasteners to the inside face of the windshield as shown.
NOTE: Be careful not to touch the windshield where adhesive will be applied.