honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Case, M/T|Service and Repair|Page 2546 > < Diagram Information and Instructions|Page 2541
Page 1
background image

Case: Service and Repair

REMOVAL

1. Remove the back-up light switch
2. Remove the cable bracket.
3. Remove the transmission attaching bolts.
4. Disconnect the breather tube.

5. Remove the 32 mm sealing bolt.
6. Expand the snap ring on the countershaft ball bearing and remove it from the groove using snap ring pliers.

Case, M/T|Service and Repair|Page 2546 > < Diagram Information and Instructions|Page 2541