honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Interior Moulding / Trim|Service and Repair|Page 5981 > < Body and Frame|Service and Repair
Page 1
background image

Carpet: Service and Repair

Carpet Replacement

SRS components are located in this area. Review the SRS component locations and the precautions and procedures before performing repairs or service.

NOTE:

-

Put on gloves to protect your hands.

-

Take care not to damage, wrinkle, or twist the carpet.

-

Be careful not to damage the dashboard or other interior trim pieces.

1. Remove these items:

-

Front seats, both sides

-

Driver's dashboard under cover

-

Passenger's dashboard lower cover

-

Rear seat cushion

-

Kick panels, both sides

-

Door sill trim, both sides

-

Consoles, front and rear

2. Remove the nut (A), and use a 6 mm hex wrench, to release the clip (B), then remove the footrest (C).

3. Using a utility knife, cut the carpet (A) under the heater areas (B), and in the parking brake lever area (C) as shown, then pull back the carpet.

Interior Moulding / Trim|Service and Repair|Page 5981 > < Body and Frame|Service and Repair