honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Switch Test/Replacement|Page 6475 > < Switch Test/Replacement
Page 1
background image

Sunroof / Moonroof Switch: Testing and Inspection
Auto-Stop Switch Test

Auto-stop Switch Test

1. Remove the headliner.

2. Disconnect the 2P connector from the moonroof auto-stop switch.

3. Check for continuity between the terminals in each switch position according to the table.

NOTE:
-

Turn the motor by hand with the wrench.

-

The auto-stop position is about 145 mm (5.75 in.) from fully closed.

4. If the continuity is not as specified, repair or replace the auto-stop switch.

Switch Test/Replacement|Page 6475 > < Switch Test/Replacement