Civic Si L4-2.0L (2004)
Air Door Actuator / Motor: Service and Repair
Mode Control Motor
Mode Control Motor Replacement
1. Remove the ECM.
2. Remove the relay mount bracket bolt, and move the relays out of the way.
3. Disconnect the 10P connector (A) from the mode control motor (B). Remove the self-tapping screws and the mode control motor from the heater
unit.
4. Install the motor in the reverse order of removal, and note these items:
-
Make sure the pin on the linkage is properly engaged with the motor.
-
After installation, make sure the motor runs smoothly.
-
Do the ECM idle learn procedure.