Civic Wagon 2WD L4-1488cc 1.5L SOHC (EW1) 3V Carb (1986)
Seat Belt: Technical Service Bulletins
Seat Belts - Rear Lap/Shoulder Seat Belt Installation
Model
Applicable To
File Under
Bulletin No.
'80-87
87-032
Civic
ALL
BODY
'83-87
Issue Date
PRELUDE
NOV 20, '87
Rear Lap/Shoulder Seat Belt Installation
SUBJECT Customers may now purchase lap/shoulder rear seat belts for 1980 to 1987 Honda automobiles.
INSTALLATION
NOTE:
A special tool is needed to complete installation of the rear seat belts. See page two for instructions on how to make the special tool.
1.
Remove the rear seat, and remove and discard the left and right rear seat belts.
NOTE:
Do not remove the center seat belt.
2.
Install the replacement retractors and receptacles as shown, then install the rear seat.
Torque:
32 N-m (3.2 kg-m, 23 ft.lbs.)
NOTE:
The retractors must be mounted on the outboard sides of the car.