CR-V 2WD L4-2.4L (2003)
Air Register: Service and Repair
Dashboard Side Vent
Dashboard Side Vent Removal/Installation
Special Tools Required
KTC trim tool set SOJATP2014
NOTE: Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
1. Carefully insert a trim tool next to the clips (A), and detach the clips by prying on the side vent (B). Take care not to scratch the dashboard and
related parts.
2. Remove the vent by releasing the hooks (C).
3. Reinstall the hook portions of the vent first, then push the clips into place securely.