honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Engine Control - MIL ON, DTC P1163|Page 2975 > < Engine Controls - DTC P2646, P2647|Page 2966
Page 1
background image

Oxygen Sensor: Customer Interest
Engine Control - MIL ON, DTC P1163

04-013

April 2, 2004

Applies To: 
2002-03 CR-V - ALL

CR-V: MIL Comes On With DTC P1163 
(Supersedes 04-013, dated March 2, 2004)

Updated information is shown with asterisks.

SYMPTOM

The MIL is on and DTC P1163 (air fuel ratio sensor slow response) is set.

PROBABLE CAUSE

*Some driving conditions may cause the ECM/PCM software to set DTC P1163. This is a software issue, and it is not an A/F (air/fuel ratio) sensor
problem.*

CORRECTIVE ACTION

Update the ECM/PCM with the software from the Interactive Network (iN) CD, March 2004 version or later.

TOOL INFORMATION

You will need these tools and equipment items:

^

iN CD (March 2004 or later)

^

iN Workstation

^

Honda Interface Module (HIM): T/N EQS05A35570

^

PC Interface Cable (RS232): T/N VET-02002832

This is the same cable you use to connect the HIM to the iN workstation. The cable is blue with an attached adapter.

^

AC Adapter (110 VAC/12 VDC Power Supply): T/N: VET-02002426

This is the adapter needed for the HIM.

These tools are already at your dealership. To order additional HIMs, interface cables, or AC adapters, call the Honda Tool and Equipment Program at
1-888-424-6857. Phone lines are open Monday through Friday from 7:30 a.m. to 7:00 p.m. CT.

WARRANTY CLAIM INFORMATION

In warranty: The normal warranty applies.

Failed Part:

P/N 37820-PPA-A52 
H/C 6917710

Defect Code:

07201

Engine Control - MIL ON, DTC P1163|Page 2975 > < Engine Controls - DTC P2646, P2647|Page 2966