CR-V 4WD L4-2.4L (2004)
7. Remove the door panel (A) with as little bending as possible to avoid creasing or breaking it.
1. Release the clips that hold the door panel with a commercially available trim pad remover (B).
2. Starting at the rear, pull the door panel upward, then release the lock knob (C).
8. From the back of the door panel, detach the harness clip (A).
9. Install the panel in the reverse order of removal, and note these items:
-
Replace any damaged clips.
-
Make sure the connector is plugged in properly and the rod is connected properly.
-
Push the clips into place securely.
-
Check the window operation.