CR-V EX 4WD L4-1972cc 2.0L DOHC MFI (2000)
Air Register: Service and Repair
Center Air Vent
Center Air Vent Removal and Installation
CAUTION:
-
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts to prevent damage.
-
Put on gloves to protect your hands.
NOTE: Take care not to scratch the dashboard and related parts.
1. Remove the center air vent, then disconnect the connector.
NOTE: Carefully insert a flat-tip screwdriver under the clips, then pull out the center air vent while prying up the clips.
2. Installation is the reverse of the removal procedure.
NOTE: Make sure the connector is connected properly.