CR-V EX 4WD L4-1972cc 2.0L DOHC MFI (2000)
17.
For vehicles equipped with ABS: Disconnect the orange 2P and 10P connectors, and detach the connectors from their mounting brackets. Detach
the harness clip on the ABS motor harness, then route the harness under clutch line A.
18.
Detach the engine harness and starter wire clips from the shock tower mounting bracket, then detach the engine harness clip from the thermostat
mounting bracket.
19.
Remove clutch line A from the engine compartment as an assembly.
20.
Transfer the plastic insulator and the clamp to the new clutch line A.