CR-V EX 4WD L4-2.4L (2002)
![background image](/honda/cr-v_ex_4wd/l4-2.4l/Page-2497001.png)
Trim Panel: Service and Repair
Trim Removal / Installation - Rear Side Pillar Area
Trim Removal/Installation - Rear Side Pillar Area
Special Tools Required
KTC trim tool set SOJATP2014
NOTE:
-
Put on gloves to protect your hands.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
-
Take care not to bend or scratch the trim and panels.
1. Remove the trim as shown. Remove the upper portion of the rear side trim panel as necessary .
2. Install the trim in the reverse order of removal, and note these items:
-
Replace any damaged clips.
-
Push the clips into place securely.
-
When installing the rear side trim panel, make sure there are no pinches in the seat belt.
-
Apply liquid thread lock to the rear seat belt anchor bolt before installation.
-
Before installing the anchor bolt, make sure there are no twists or kinks in the seat belt.