CR-V LX 2WD L4-1972cc 2.0L DOHC MFI (1998)
Store the removed airbag on a secure, flat surface away from any high heat source (exceeding 200° F / 93° C).
Never perform electrical inspections to the airbags, such as measuring resistance
Do not position yourself in front of the airbag assembly during removal, inspection, or replacement.
CAUTION: Improper handling or storage can internally damage the airbag assembly, making it inoperative. If you suspect the airbag assembly has
been damaged, install a new unit, and refer to the Deployment/Disposal Procedures (see "Damaged Airbag Special Procedure") for disposing of the
damaged airbag.
Wiring Precautions
Never attempt to modify, splice or repair SRS wiring.
NOTE: SRS wiring can be identified by special yellow outer covering.
