CR-V LX 2WD L4-1972cc 2.0L DOHC MFI (1998)
Starter Solenoid Test
1. Check the hold-in coil for continuity between the S terminal and the armature housing (ground). The coil is OK if there is continuity.
2. Check the pull-in coil for continuity between the S and M terminals. The coil is OK if there is continuity.
Field Winding Test
1. Check for continuity between the brushes. If there's no continuity, replace the armature housing.
2. Check for continuity between each brush and the armature housing (ground). If there is continuity, replace the armature housing.
Brush Inspection