CR-V LX 2WD L4-1972cc 2.0L DOHC MFI (1998)
4WD: Remove the snap pin and control pin, then separate the shift cable from the control lever.
2WD: Remove the control lever, then separate the shift cable from the control shaft.
7. Remove the nuts securing the shift cable holder, then remove the shift cable.
8. Install the shift cable in the reverse order of the removal.
NOTE:
^
Do not bend the shift cable excessively when installing it.
^
Make sure the lock pin is seated securely in the cable adjuster.
^
Replace the lock pin if it does not snap over the cable adjuster securely.
9. Check the cable adjustment after installing it.
