CR-V LX 2WD L4-1972cc 2.0L DOHC MFI (1998)
Valve Body: Service and Repair
Overhaul
ATF Pump
1. Install the ATF pump gears and ATF pump driven gear shaft in the main valve body. Lubricate all parts with ATF, and install the ATF pump
driven gear with its grooved and chamfered side facing up.
2. Measure the side clearance of the ATF pump drive and driven gears. ATF Pump Gears Side (Radial) Clearance Standard (New):
-
ATF Pump Drive Gear: 0.105 - 0.1325 mm (0.004 - 0.005 inch)
-
ATF Pump Driven Gear: 0.035 - 0.0625 mm 10.0014 - 0.0025 inch)