CR-V LX 4WD L4-1972cc 2.0L DOHC MFI (2000)
4. Pull out the outer handle. Pry the outer handle rod out of its joint using diagonal cutters.
NOTE:
-
To ease reassembly, note location (A) of the outer handle rod on the joint before disconnecting it.
-
Take care not to bend the outer handle rod.
-
Use a shop towel to protect the opening in the door.
5. Installation is the reverse of the removal procedure.
NOTE:
-
Make sure the door locks and opens properly.
-
Make sure the outer handle rod is connected properly.
