honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Braking Sensor/Switch > < Brake Fluid Pump|Testing and Inspection
Page 1
background image

Brake Fluid Pump Relay: Testing and Inspection

Normally-open type:

1. Check for continuity between the terminals.

-

There should be continuity between the No.4 and No.3 terminals when power and ground are connected to the No.1 and No.2 terminals.

-

There should be no continuity between the No.4 and No.3 terminals when power is disconnected.

ABS Pump Motor Relay

Braking Sensor/Switch > < Brake Fluid Pump|Testing and Inspection