CR-V LX 4WD L4-1972cc 2.0L DOHC MFI (2000)
WARNING: When heavy rear components such as suspension, fuel tank, spare tire and tailgate are to be removed, place additional weight in
the trunk before hoisting. When substantial weight is removed from the rear of the vehicle, the center of gravity may change and
can cause the vehicle to tip forward on the hoist.
NOTE: Since each tire/wheel assembly weighs approximately 30 lbs (14 kg), placing the front wheels in the cargo area can assist with weight
distribution.
1. Place the lift blocks as shown.
2. Raise the hoist a few inches (centimeters), and rock the vehicle to be sure it is firmly supported.
3. Raise the hoist to full height, and inspect the lift points for solid support.
NOTE: Use the same support points to support the vehicle on safety stands.
