CR-V LX 4WD L4-2.4L (2002)
Front Door Panel: Service and Repair
Front Door Panel Removal/Installation
Special Tools Required
-
Trim pad remover. Snap-on A 177A, or equivalent, commercially available.
-
KTC trim tool set SOJATP2014
NOTE: Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
1. Using a trim tool, pry out the upper portion of the cover (A) to release the hooks (B), then remove the cover.
2. Remove the screws.
3. Driver's door: Pull the inner handle (A) rearward and out half-way to release the power door lock switch bracket (B) from the door panel (C).
4. Passenger's door: Pull the inner handle (A) halfway.