CR-V LX 4WD L4-2.4L (2002)
10.
Civic only: Reinstall the EVAP canister vent filter hose to its mounts.
11.
Lower the vehicle, and connect the PGM Tester to the data link connector. Clear the DTC.
12.
Use the PGM Tester to do the EVAP function test.
^
If the vehicle passes the EVAP function test, the repair is complete.
^
If the PGM Tester indicates a fault in the evaporative emissions system, refer to Service Bulletin 02-007, EVAP System Function Testing and
Diagnostics With the PGM Tester, found under Fuel and Emissions, for proper diagnosis and repair.
DISCLAIMER