honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Recall - SRS Cable Reel Replacement|Page 7415 > < Recall - SRS Cable Reel Replacement|Page 7413
Page 3
background image

Some vehicles affected by this recall may be in your new or used vehicle inventory. According to federal law, these vehicles cannot be sold or leased
until they are repaired. To see if a vehicle is affected by this recall, do a VIN status inquiry before selling it.

CORRECTIVE ACTION

Inspect the cable reel connector wiring, and if necessary, replace the SRS cable reel 4P connector, and reposition the cable reel connector wires.

PARTS INFORMATION

SRS Connector Set:

P/N 77978-S04-305, H/C 7806789
(Includes connector and lock tab)

TOOL INFORMATION

SRS Terminal Tool Set:

T/N 070AZ-SCAA120
[Includes Terminal Tool A (two prongs) and Terminal Tool B (one prong)].

WARRANTY CLAIM INFORMATION

In warranty: 
The normal warranty applies.

Operation Number:

753103

Flat Rate Time:

0.3 hour

Failed Part:

P/N 77900-S5A-A14 
H/C 6850176

Defect Code:

5AH

Symptom Code:

P34

Template ID:

04-035A

Skill Level:

Repair Technician

REPAIR PROCEDURE

NOTE

To avoid contaminating the SRS cable reel terminals, make sure your hands are clean while working on the cable reel connector.

1.

Turn the ignition switch to ON (II), and watch the SRS indicator.

^

If the indicator goes off within 10 seconds, go to step 2.

^

If the indicator stays on, troubleshoot and repair the cause before continuing. If the required repair includes SRS cable reel replacement, go to
step 19. Otherwise, go to step 2.

*2.

Turn the ignition switch to the LOCK (0) position, and remove the access panel from the steering wheel.*

Recall - SRS Cable Reel Replacement|Page 7415 > < Recall - SRS Cable Reel Replacement|Page 7413