CR-V LX 4WD L4-2.4L (2002)
![background image](/honda/cr-v_lx_4wd/l4-2.4l/Page-1608003.png)
11.
Unwind the boot band tool, and cut off the excess 5 to 10 mm (0.2 to 0.4 in.) from the clip.
12.
Secure the end of the boot band by tapping it down over the clip with a hammer.
13.
Make sure that the boot band and clip do not interfere with anything and that the band does not move.
14.
If necessary, repeat steps 5 through 13 to install the boot band on the small end of the boot.
Disclaimer