CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
![background image](/honda/cr-v_se_4wd/l4-1972cc_2.0l_dohc_mfi/Page-1653009.png)
-3. Also clean and degrease where masking tape will be attached.
11. Masking
-
Remove all existing masking paper, then mask with new paper.
-
Use a heat resistant type masking tape (SCOTCH TAPE) where tape is attached directly to the bumper.
-
Use brown paper or masking roll paper to cover.
NOTE:
-
Mask the area completely to prevent overspray.
-
Protect resin parts with aluminum foil under the brown paper or masking paper to prevent damage due to heat during baking.
12. Top Coating (Resin-pattern Painting)
-
Air dry and degrease the surface before spraying the paint. Also clean the surface with a tack cloth.
WARNING:
-
Ventilate when spraying paint. Most paint contains substances that are harmful if inhaled or swallowed. Rea d the paint label before
opening the paint container.
-
Avoid contact with skin. Wear an approved respirator, gloves, eye protection, and appropriate clothing when painting.
-
Paint is flammable. Store it in a safe place, and keep it away from sparks, flames, or cigarettes.
-
Remove dust and dirt from the surface to be coated with compressed air, then use a tack cloth.
-
Use a strainer when filling the cup with paint.
-
Observe the fallowing conditions to spray surfacer in original surface pattern.
NOTE: Above viscosity specification assums an ambient temperature of 20 degrees C (68 degrees F). If necessary, match viscosity t o the
temperature.
-1. Test Spraying
-
Before spraying the desired part, try a test piece to check the condition of the resin-pattern painting and the spray quality.
-
Keep the spray gun 20-30 cm (8-12 in) from the surface.
NOTE:
-
Use a wide test piece.
-
Apply 2-2.5 coats in two directions to make the resin-pattern painting.
-
Spray the paint for lusterless.
-
Do not try to cover the surface with heavy coat.
WARNING:
-
Ventilate when spraying paint. Most paint contains substances that are harmful if inhaled or swallowed. Read the paint label
before opening the paint container.
-
Avoid contact with skin. Wear an approved respirator, gloves, eye protection, and appropriate clothing when painting.