CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
In warranty:
American Honda will reimburse for this repair only under these conditions:
^
It is done during PDI
^
No more than 30 days have elapsed since the vehicle was received at the dealership (according to the date noted on the motor carrier's bill of lading)
Operation number:
812355
Flat rate time:
1.0 hour
Failed P/N:
PDI-PAINT, H/C 3173994
*Defect code:
08103
Symptom code
08811*
Skill level:
Repair Technician
*NOTE:
When submitting the claim, make sure you enter the vehicle's date of receipt in the customer contention comment section. The claim will be rejected
without this information.*
REPAIR PROCEDURE
1.
Wash and dry the vehicle out of direct sunlight.
2.
Tear off a piece of clay. Shape the piece with your hands into a flat disk about 3 inches in diameter.
3.
Spray a 2-to 3-square-foot area of the affected panel with the manufacturer's lubricant.
4.
Clean a 1-square-foot section of the sprayed area by rubbing it with the clay.