CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
Relay Box: Service and Repair
SRS components are located in this area. Review the SRS component locations, precautions, and procedures in the SRS before performing repairs or
service.
Removal:
1. Make sure you have the anti-theft code for the radio, then write down the frequencies for the radio's preset buttons (with anti-theft feature).
2. Disconnect the battery negative cable, then disconnect the positive cable, and wait at least 3 minutes.
3. Remove the driver's dashboard lower cover and the knee bolster.
4. Remove the two mounting nuts, and pull the under- dash fuse/relay box out from under the dash.
5. Disconnect the connectors from the under-dash fuse/relay box (see SRS main harness connector), and take out the under-dash fusel relay box.
Installation:
1. Connect the connectors to the under-dash fuse/ relay box (see SRS main harness connector), then install the under-dash fuse/relay box in the
reverse order of removal.
2. Install the knee bolster and the driver's dashboard lower cover.
3. Connect the battery positive cable, then connect the negative cable.
4. Enter the anti-theft code for the radio, then enter the customer's radio station presets (with anti-theft feature).
5. Confirm that all systems work properly.
