CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
12. To prevent damage to the O-rings, install the injectors in the fuel rail first, then install them in the intake manifold.
13. Install and tighten the retainer nuts.
14. Connect the vacuum hoses and fuel return hose to the fuel pressure regulator.
15. Connect the PCV valve.
16. Connect the connectors to the injectors.
17. Coat a new O-ring with clean engine oil, and install the resonator chamber.
18. Turn the ignition switch ON (II), but do not operate the starter. After the fuel pump runs for approximately 2 seconds, the fuel pressure in the fuel
line rises. Repeat this 2 or 3 times, then check whether there is any fuel leakage.