CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
![background image](/honda/cr-v_se_4wd/l4-1972cc_2.0l_dohc_mfi/Page-215002.png)
2. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, make the following input tests at the connector.
-
If a test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, the power window maser switch must be faulty; replace it.