CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
Note these items during disassembly:
-
The power steering components are made of aluminum. Avoid damaging the components during assembly.
-
Clean the disassembled parts with a solvent, and dry them with compressed air. Do not dip the rubber parts in a solvent.
-
Always replace the O-rings and rubber seals with new ones before assembly.
-
Apply recommended power steering fluid to the parts indicated in the assembly procedures.
-
Do not allow dust, dirt, or other foreign materials to enter the power steering system.
-
Replace the pump as an assembly if the parts indicated with asterisk (*) are worn or damaged.
1. Drain the fluid from the pump.