CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
![background image](/honda/cr-v_se_4wd/l4-1972cc_2.0l_dohc_mfi/Page-1259005.png)
2. Replace the ball bearing using a press.
Reassembly
1. Align the pin of the sub-valve with the oil passage in pump housing, and push down the sub-valve. Install the snap ring properly.
2. Install the new pump seal (with its grooved side facing in) into the pump housing by hand, then install the pump seal spacer.