CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
Throttle Valve Solenoid: Service and Repair
1. Remove the mounting bolts and the A/T clutch pressure control solenoid valve.
2. Clean the mounting surface and fluid passage of the A/T clutch pressure control solenoid valve and transmission housing.
3. Install a new A/T clutch pressure control solenoid valve with a new gasket. Do not pinch the gasket during installation, and make sure it is
installed properly in the mounting groove of the A/T clutch pressure control solenoid valve.
4. Check the connector for rust, dirt, or oil, then connect it securely.