CR-V SE 4WD L4-1972cc 2.0L DOHC MFI (2001)
3. Disconnect the connector, remove the bolts, then remove the windshield wiper linkage assembly.
4. Separate the windshield wiper linkage and windshield wiper motor.
NOTE: Scribe a line across the link and windshield wiper linkage to show the original adjustment.
5. Installation is the reverse of the removal procedure.
NOTE:
-
Make sure the connector is connected properly.
-
If necessary, replace any damaged clips.
-
Install the windshield wiper arms as described.
-
Check the windshield wiper motor operation.
-
Grease the moving parts.