CR-Z L4-15L Hybrid (2011) - Headlamp Service and Repair
Headlamp: Service and Repair
Headlight Bracket Replacement
NOTE: Put on gloves to protect your hands.
If the lower rear bracket (A) or the lower front bracket (B) on the headlight assembly (C) is broken, the headlight assembly can be repaired using the
repair brackets if it meets this criteria:
-
There is no damage to the headlight assembly.
-
The sealing of the headlight lens and headlight housing is maintained.
Replacement
1. Remove the front bumper.
2. Remove the headlight assembly.
3. Cut or grind off the damaged lower rear bracket (A) or the lower front bracket (B) so that the bosses (C) on the headlight housing (D) are left as
shown. After removing the damaged bracket, finish the cut area with 400 grit sandpaper. Take care not to scratch the headlight assembly.
4. Install the lower rear repair bracket (A) or the lower front repair bracket (B) on the bosses (C) on the headlight housing (D), then fasten it with the
screws (E) provided with the repair bracket.