honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Body and Frame > < Navigation System - Controls/Setup/Operation|Page 199
Page 7
background image

For a list of current detailed coverage areas by country and state/province, refer to the navigation manual or go online to Honda Online, select the View
Current Coverage Map link, use the pull-down menu to select the vehicle Year and Model, then select View Coverage.

HAWAII SYSTEM SETUP

The white navigation DVD contains maps for the 48 contiguous states, parts of southern Canada, and Hawaii. If the vehicle is sold in Hawaii or relocated
from the mainland to Hawaii, you must change the map coverage so the applicable maps are displayed. To change the map coverage for use in Hawaii,
do this:

1. Press and hold the MENU, MAP/GUIDE, and CANCEL buttons at the same time. The display changes to the Select Diagnosis Items screen.

2. Select Detail Information & Settings.

3. Select Coverage area. Then select Hawaii coverage. The system may reboot.

4. Start the engine, and drive the vehicle to an open area so the system can acquire a GPS signal.

5. After the system has initialized, do the map matching by driving the vehicle on a road until the road name appears at the bottom of the map screen.

NOTE:

^

If a vehicle is relocated from Hawaii to the mainland, you must change the coverage area to US.

^

When you change the coverage area, any previous destinations, address book, and other system settings are changed to the factory defaults.

^

XM Radio is not available in Hawaii.

ORDERING A NAVIGATION DVD

Replacement navigation DVDs can be ordered online. Select Order Navigation DVD. You can also call the Honda Disc Fulfillment Center. Both
methods require a major credit card.

For more information about ordering the correct DVD for the vehicle, refer to Service Bulletin 05-032, Navigation System DVD Information and
Inspection.

Disclaimer

Body and Frame > < Navigation System - Controls/Setup/Operation|Page 199