Crosstour 2WD V6-3.5L (2011)
Maintenance Required Lamp/Indicator: Service and Repair
Resetting the Engine Oil Life Display
Reference:
-
For information regarding interpreting the maintenance minder display refer to Maintenance Required Lamp/Indicator / Description and Operation
/ "Reading the Maintenance Minder".
Reset the display after completing the required maintenance service. You will see "OIL LIFE 100%" on the information display the next time you turn
the ignition switch to the ON (II) position.
Reset the maintenance minder as follows:
1. Turn the ignition switch to the ON (II) position.
2. Press the select/reset knob repeatedly until the engine oil life indicator is displayed.
3. Press the select/reset knob for about 10 seconds. The engine oil life and the maintenance item code(s) will blink.