Crosstour 4WD V6-3.5L (2010)
Engine Control Module: Customer Interest
Engine Controls - MIL ON/DTC's P0300-P0304 Stored
10-033
August 11, 2010
Applies To:
2008-10 Accord V6 with Automatic Transmission - ALL 2010 Accord Crosstour - ALL
MIL Comes On With DTC P0300 Thru P0304
(Supersedes 10-033, dated July 12, 2010, to revise the information marked by the black bars and asterisks)
*REVISION SUMMARY
Under WARRANTY CLAIM INFORMATION, an operation number was added for vehicles that do not need spark plugs.*
SYMPTOM
One or more spark plugs may be fouled, and the MIL comes on with at least one of these DTCs: P0300 (random cylinder misfire detected), P0301,
P0302, P0303, or P0304 (No.1 thru No.4 cylinder misfire detected).
CORRECTIVE ACTION
Update the PCM, and replace any fouled spark plugs.
PARTS INFORMATION
Spark Plug:
P/N 12290-R70-A01 (except PZEV)
P/N 12290-R71-L01 (PZEV)
SOFTWARE INFORMATION
HDS Software Version:
2.022.101 or later.
HDS Control Module (CM) Update:
Database Update 02-JUL-2010 or later.
NOTE:
To avoid an incorrect repair that would not be covered under warranty, use the software version listed above or a later version.
The updated PGM-FI software program IDs and P/Ns are listed below. If the HDS is loaded with the latest software, and it displays No Update Needed
during the update, the software for this service bulletin is already installed.
WARRANTY CLAIM INFORMATION