honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

All Other Service Bulletins for Unibody: > < Interior - Gap Between Side and Rear Trim Panels
Page 2
background image

Rear Panel

4.

Bend back the rear panel and fit a 4 mm J nut onto the edge of the side panel, so it lines up with the hole you drilled.

5.

Fasten the two panels together by installing a self-tapping screw.

PARTS INFORMATION

4 mm J Nut:

H/C 1169861
P/N 90302-SA4-003

Self-tapping Screw: H/C 1169531 P/N 90103-693-010

WARRANTY CLAIM INFORMATION

Use operation number 850020, defect code 074, and a total time of 0.3 hour. For the failed part use H/C 163674.

All Other Service Bulletins for Unibody: > < Interior - Gap Between Side and Rear Trim Panels