CRX DX L4-1493cc 1.5L SOHC (D15B2) TBI (1988)
_tbi/Page-431001.png)
Fuel Injector Resistor: Testing and Inspection
Fig. 46 Injector resistor terminal identification
Civic Wagon w/1.6L engine & CRX HF & Si Models
1.
Disconnect resistor electrical connector.
2.
Using suitable ohmmeter, check resistance between power terminal A and all other terminals, Fig. 46. Resistance between terminals should be 5-7
ohms.
3.
If resistance is not as specified, replace resistor.
