CRX DX L4-1493cc 1.5L SOHC (D15B2) TBI (1988)
Shift Fork: Service and Repair
Reverse Shift Fork/Shift Piece
1. Measure the clearance between the reverse shift fork and shift piece pin.
Standard: 0.05-0.35 mm (0.002-0.014 in.)
Service Limit: 0.5 mm (0.020 in.)
2. If the clearance is outside the above limits, measure the width of the L-groove in the reverse shift fork.
3. Replace the reverse shift fork with a new one if the width exceeds 7.25 mm (0.285 in.).