Del Sol L4-1.5L SOHC (1993)
Fig. 19 Brake Line Banjo Bolt
3. Remove banjo bolt and disconnect brake hose from caliper, Fig. 11.
4. Remove caliper bolts, then the caliper.
Installation
1. Install caliper and caliper bolts.
2. Connect brake hose to caliper, then install banjo bolt.
2. Bleed front brakes, then install wheel and tire assemblies.
Disassembly
WARNING:
^
Never use an air hose or dry brush to clean brake assemblies.
^
Use an OSHA-approved vacuum cleaner to avoid breathing brake dust.
CAUTION:
^
Do not spill brake fluid on the car; it may damage the paint; if brake fluid does contact the paint, wash it off immediately with water.
^
To prevent spills, cover the hose joints with rags or shop towels.
^
Clean all parts in brake fluid and air dry; blow out all passages with compressed air.
1. Remove the banjo bolt and disconnect the brake hose from the caliper.
Caliper Removal
2. Remove caliper bolt B and pivot the caliper up out of the way, then remove the caliper from the bracket.