Del Sol L4-1.5L SOHC (1993)
3. Apply silicone grease to the sealing lips and inside of a new piston boot, install the boot in the cylinder groove and secure it with the boot clip.
CAUTION: Be careful not to damage the caliper cylinder wall.
Caliper Piston Installation
4. Lubricate the caliper cylinder and piston with brake fluid, then install the piston in the cylinder with the dished end facing in.
5. Apply silicone grease to the sliding surface of sleeve B and the inside of new pin and sleeve boots.
Installation Of Sleeve, Pin Boots, And Sleeve B
6. Install the new sleeve and pin boots and sleeve B on the caliper.
NOTE: Be sure to install the boots into the grooves in the caliper and sleeve B properly.
7. Apply silicone grease to the sliding surface of sleeve A and the inside of a new pin boot.
8. Install the pin boot into the groove in the sleeve A.