honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Clockspring Assembly / Spiral Cable, Air Bag > < Air Bag Control Module|Service and Repair|Page 5114
Page 1
background image

Air Bag Safety Switch/Connector: Service and Repair

Short Connector

WARNING: To avoid accidental deployment and possible injury, always install the protective short connector(s) on the driver's (and passenger's) airbag
connector(s) before working near any SRS wiring.

1. Disconnect the battery negative cable, then disconnect the positive cable.

Connecting The Short Connector

2. Remove the access panel from the steering wheel, then remove the short connector (RED) from the panel.
3. Disconnect the 3P connector between the driver's airbag and cable reel, then install the short connector (RED) on the airbag side of the connector.

Clockspring Assembly / Spiral Cable, Air Bag > < Air Bag Control Module|Service and Repair|Page 5114