honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Impact Sensor > < Clockspring Assembly / Spiral Cable, Air Bag|Service and Repair|Page 5125
Page 1
background image

Diagnostic Connector: Service and Repair

Removing The SRS Connector From The Fuse Box

CAUTION: Avoid breaking the connector; it's double-locked.

1. First lift the connector lid with a thin screwdriver, then press the connector tab down and pull the connector out.
2. To reinstall the connector, push it into position until it clicks, then close its lid.

Impact Sensor > < Clockspring Assembly / Spiral Cable, Air Bag|Service and Repair|Page 5125