Del Sol L4-1.5L SOHC (1993)
![background image](/honda/del_sol/l4-1.5l_sohc/Page-905001.png)
Starter Cut Relay: Testing and Inspection
Mitsuba Starters
1. Remove and disconnect starter relay.
Fig. 10 Starter Relay Terminal Locations
2. Apply battery voltage to C and D terminals of relay, Fig. 10.
3. Check continuity between A and B terminals of relay. Continuity should exist.
4. Disconnect battery voltage. There should be no continuity between A and B terminals of relay.
5. If relay does not operate as specified, replace relay.