honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Power Door Lock Control Module > < Driver's Door|Page 6356
Page 1
background image

Power Door Lock Actuator: Testing and Inspection
Passenger's Door

1.  Remove the passenger's door panel.
2.  Disconnect the 2P connector from the actuator.

Passenger's Door Lock Actuator Test

3.  Check actuator operation by connecting power and ground according to the table.

CAUTION: To prevent damage to the actuator, apply battery voltage only momentarily.

^  If the actuator fails to work properly, replace it.

Power Door Lock Control Module > < Driver's Door|Page 6356