Del Sol Si VTEC L4-1590cc 1.6L DOHC (VTEC) MFI (1997)
Brake Pad: Testing and Inspection
Rear
WARNING:
-
Never use an air hose or dry brush to clean brake assemblies. Use an OSHA-approved vacuum cleaner to avoid breathing brake dust.
-
Block the front wheels before lacking up the rear of the vehicle.
REMOVAL
^ Block the front wheels, loosen the rear wheel nuts slightly, support the rear of vehicle on safety stands, then remove the rear wheels.
^ Release the parking brake.
Removing Caliper Shield
^ Remove the caliper shield.
Removing Caliper From Bracket
^ Hold the caliper pins with a thin, open-end wrench, and remove the two caliper bolts and the caliper from the bracket.
CAUTION: Thoroughly clean the outside of the caliper to prevent dust and dirt from entering inside. Support the caliper with a piece of wire so
that it does not hang from the brake hose.