Del Sol Si VTEC L4-1590cc 1.6L DOHC (VTEC) MFI (1997)
_mfi/Page-1303007.png)
Removing Adjusting Spring And Bearing A From Adjusting Bolt
11. Remove the spring cover, adjusting spring B, spacer, bearing A and cup from the adjusting bolt.
Removing Pin Form Cam
12. Remove the sleeve piston, and remove the pin from the cam in the caliper body.
13. Remove the return spring.
CAUTION: Do not loosen the parking nut with the cam installed in the caliper body. If the lever and shaft must be separated, hold the lever in a
vise and loosen the parking nut.
14. Remove the parking lever and cam as an assembly from the caliper body.
