honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Wheel Speed Sensor > < Parking Brake Switch|Page 4955
Page 1
background image

Parking Brake Warning Switch: Testing and Inspection

1.  Remove the rear console, and disconnect the connector from the switch.

Brake Warning System-Parking Brake Switch Test

2.  There should be continuity between the positive terminal and body ground with the brake lever up. There should be no continuity with the brake

lever down.

NOTE: Canada only:
If the parking brake switch is OK, but the brake warning system does not function, perform the input test for daytime running lights control unit.

Wheel Speed Sensor > < Parking Brake Switch|Page 4955