Del Sol Si VTEC L4-1590cc 1.6L DOHC (VTEC) MFI (1997)
_mfi/Page-1352002.png)
Measuring Air Gap Between Front Sensor And Pulser
-
Check the pulser for chipped or damaged teeth and replace if necessary.
-
Measure the air gap between the sensor and pulser all the way around while rotating the driveshaft by hand.
Specs:
Standard 0.4 - 1.0 mm (0.02 - 0.04 in)
NOTE: If the gap exceeds 1.0 mm (0.04 in) at any point, the probability is a distorted knuckle, which should be replaced.
