Del Sol Si VTEC L4-1590cc 1.6L DOHC (VTEC) MFI (1997)
_mfi/Page-1739003.png)
7. Remove the two screws, and remove the switch.
Set/Resume Switch Test
8. Check for continuity between the terminals in switch position according to the table.
^ If there is continuity, and it matches the table, replace the cable reel.
^ If there is no continuity in one or both positions, replace the switch.
9. If all tests prove OK, reinstall the driver's airbag assembly, and reconnect the cable reel sub-harness connector to the main wire harness.
10. Reconnect the driver's and front passenger's airbag connectors.
11. Reconnect the battery positive cable, then the negative cable.
12. After installing, confirm proper system operation:
^ Turn the ignition switch ON (II); the SRS indicator light in the gauge assembly should come on for about six seconds and then go OFF.
^ Make sure the horn works.
